PIC16C84 Programmer.

This Programmer is powered by the RS-232 and it works with RS-232 levels at only < ±7.0V.



The high Vpp is obtained by using the negative voltage to drive the chip. The voltage is stabilized with zener diodes. This makes it possible to use extra low input voltage.
Transistor driver guarantee output level > ±3V.

The Programmer programs both PIC-16C84 and 24C16 EEPROM's.
It supports In Circuit Programming with automatic 'go' function.

Download utilities, PGM84V28.ZIP (25K).
Download PIP-02 driver, JDM84V23.ZIP (10K). (Old PIP02 only.)
PCB for this programmer.
EEPROM adapter for this programmer. (Supports Automatic Switch Function and LC types.)

The software only works from dos (not windows dos prompt or windows 95).

An improved version, for LINUX too.


References:

Please mail if you has got problems with programmers.
I am sorry, but I am not able to use money on keeping this page active. Please be patient.
PQ-Programmer | Lowcost Programmer | Extra lowcost Programmer | Hardware Simulator | Files
E-Mail address: Jens.Madsen@post3.tele.dk