[OpenCM] Re: Addition of subproject : Problem in reconfigure
Dan.Martin at slmd.com
Dan.Martin at slmd.com
Tue May 27 14:39:33 PDT 2003
Mohan,
You can use the Attribute Copy but you have be in the ccm_admin role.
Jean is correct as well. The only thing is I think the B project never got
the same release values and was not in the work area when project A was
released. I would have to look at it to see.
The principle still stands. The new project you just checked out will have
everything from the baseline Release that you checked out of plus any new
tasks you add. This means that either project B objects were not released
along with project A because they were reconfigured out before the release
or they were not associated with a task. Files objects do not have a
baseline attribute. They only have Release value and a task association
value. Either the release value is wrong for these objects or the Task
that they are associated with is not included in the Baseline. The other
possibility is they did not get a Task associated with them in the first
place for whatever reason.
Check these 2 things and you should be able to determine what happened.
Dan Martin
"Cao, Jean"
<jean.cao at brook To: "'Open CM Mailing List'" <opencm at armory.com>
s.com> cc:
Sent by: Subject: RE: [OpenCM] Re: Addition of subproject : Problem in
opencm-bounces@ reconfigure
armory.com
05/27/2003
10:16 AM
Please respond
to Open CM
Mailing List
Hi Mohan,
You do not need to add the tasks of project B again, after project B
released. When you check out from Project B again to a prep project. You
need check and select baseline from reconfigure properties.
Project B is new it do not have baseline when you check in the first time.
It cause the problem you need add the tasks. After you check in the first
time, you have proper baseline. it won't need task again.
Jean Cao
Configuration management
Brooks Automation Software Corp.
- 100 - 13777 Commerce Parkway, Richmond, BC, V6V 2X3
Telephone: 604-214-5136 Facsimile: 604-214-5001
Email: jean.cao at brooks.com
-----Original Message-----
From: mohan_tarole at chennai.tcs.co.in
[mailto:mohan_tarole at chennai.tcs.co.in]
Sent: Tuesday, May 27, 2003 3:09 AM
To: opencm at armory.com
Subject: [OpenCM] Re: Addition of subproject : Problem in reconfigure
Hi All,
Thanks everybody for your suggestions
I could sovle this problem, by adding migration task of project B into
the reconfigure template of project A's new release.
is it a brute force method or this is the way to add the the project
Now If I release this project and derive new project with new release
value , again do I need to add the tasks of project B?
If Yes , then what is the parmanent solution?
I was also trying the method suggested by Dan Martin of attribute
copy.
But as the project that I added was already in the relased state,
Attribute copy is failing (I've not created the working project of
project B)
Regards,
Mohan
opencm-request at armory.com
Sent by: To: opencm at armory.com
opencm-bounces at armory.com cc:
Subject: opencm
Digest, Vol 1, Issue 16
05/27/2003 10:47 AM
Please respond to opencm
Send opencm mailing list submissions to
opencm at armory.com
To subscribe or unsubscribe via the World Wide Web, visit
http://www.armory.com/mailman/listinfo.cgi/opencm
or, via email, send a message with subject or body 'help' to
opencm-request at armory.com
You can reach the person managing the list at
opencm-owner at armory.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of opencm digest..."
Today's Topics:
1. Addition of subproject : Problem in reconfigure
(mohan_tarole at chennai.tcs.co.in)
2. RE: Addition of subproject : Problem in reconfigure (Sharon
Cohen)
3. RE: Addition of subproject : Problem in reconfigure
(pradeep.george at philips.com)
4. RE: Addition of subproject : Problem in reconfigure (Cao, Jean)
5. Re: Addition of subproject : Problem in reconfigure
(Dan.Martin at slmd.com)
----------------------------------------------------------------------
Message: 1
Date: Mon, 26 May 2003 11:02:40 +0530
From: mohan_tarole at chennai.tcs.co.in
Subject: [OpenCM] Addition of subproject : Problem in reconfigure
To: opencm at armory.com
Message-ID:
<OF213581E9.4B29ED92-ON65256D32.001C5440 at chennai.tcs.co.in>
Content-Type: text/plain; charset="us-ascii"
Skipped content of type multipart/alternative
------------------------------
Message: 2
Date: Mon, 26 May 2003 09:45:13 +0200
From: "Sharon Cohen" <Sharon.Cohen at Tescom.co.il>
Subject: RE: [OpenCM] Addition of subproject : Problem in reconfigure
To: "Open CM Mailing List" <opencm at armory.com>
Message-ID:
<8325DEA52D361C428A702C27C76171C121588F at exchange-il.il.tescom.net>
Content-Type: text/plain; charset="utf-8"
Mohan,
When releasing project A, what was the status of project B?
You should check your reconfigure properties\template of project A. -
can you write what folders u r using?
Regards,
Sharon
-----Original Message-----
From: mohan_tarole at chennai.tcs.co.in
[mailto:mohan_tarole at chennai.tcs.co.in]
Sent: Mon 5/26/2003 8:32 AM
To: opencm at armory.com
Cc:
Subject: [OpenCM] Addition of subproject : Problem in
reconfigure
Hi All,
Thanks for support for my previous query
I got one more problem
I'm using Continnus CM v5.1 with UNIX client
I've a project (say A) hierarchy with 5-subprojects
under it ( with release value X)
I migrated one project (say B) and moved it to
released state with release Y
Now I added the project B as subproject of project A
( I used Use command to do this)
After making the B as subproject of A , I released the
project A.
Then I created new release value and derived new prep
project from released project A
Now, when I'm trying to reconfigue the new prep
project, I'm getting following warning
04/25 11:48:05 Warning: No candidates found for
directory entry B:project:1. It will be left empty!.
04/25 11:48:06 Warning! 'B~V1.1_CT:project:1' unused
under 'A~6:dir:1' in project 'A~mohan' - not a candidate.
Hope I made my problem clear.
Waiting for your valuable suggestions
Thanks and Regards,
Mohan
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 5658 bytes
Desc: not available
Url :
http://deepthought.armory.com/pipermail/opencm/attachments/20030526/f428a832/attachment-0001.bin
------------------------------
Message: 3
Date: Mon, 26 May 2003 00:45:43 -0700
From: pradeep.george at philips.com
Subject: RE: [OpenCM] Addition of subproject : Problem in reconfigure
To: Open CM Mailing List <opencm at armory.com>
Cc: Open CM Mailing List <opencm at armory.com>,
opencm-bounces at armory.com
Message-ID:
<OF8FA868C9.8680A639-ON88256D32.002A4BE8-88256D32.002C7BC0 at diamond.philips.com>
Content-Type: text/plain; charset=us-ascii
Couple of questions:
#1. When you checked out project A to prep, did you also checkout the
subprojects?
#2. Is the work-area of the released project maintained?
You should not make the work-area of subproject B relative, and try to
unmaintain it.
Also, please check "reconf_consider_all_cands" keyword, that could
solve your problem.
Regards,
\\\ | ///
\\ ~ ~ //
( @ @ )
-------------oOOo-(_)-oOOo-------------
Pradeep George
Nexperia Digital Consumer Platform Software Development Group
1140 McKay Dr. +1 (408) 991-2823
(Work)
Mail Stop- SVL-13 +1 (408) 205-8361
(Cell)
San Jose, CA 95131-1706 +1 (408) 991-4077 (Fax)
http://www.philips.com
----------------Oooo-----------
oooO ( )
( ) ) /
\ ( (_/
\_)
To: Open CM
Mailing List <opencm at armory.com>
cc: (bcc: Pradeep
George/SVL/SC/PHILIPS)
Subject: RE:
[OpenCM] Addition of subproject :
Problem in
reconfigure
Sharon Cohen
<Sharon.Cohen at tescom.co. Classification:
il> Unclassified
Sent by:
opencm-bounces at armory.co
m
05/26/2003 12:45 AM
Please respond to Open
CM Mailing List
Mohan,
When releasing project A, what was the status of project B?
You should check your reconfigure properties\template of project A. -
can you write what folders u r using?
Regards,
Sharon
-----Original Message-----
From: mohan_tarole at chennai.tcs.co.in
[mailto:mohan_tarole at chennai.tcs.co.in]
Sent: Mon 5/26/2003 8:32 AM
To: opencm at armory.com
Cc:
Subject: [OpenCM] Addition of subproject : Problem in reconfigure
Hi All,
Thanks for support for my previous query
I got one more problem
I'm using Continnus CM v5.1 with UNIX client
I've a project (say A) hierarchy with 5-subprojects under it ( with
release value X)
I migrated one project (say B) and moved it to released state with
release Y
Now I added the project B as subproject of project A ( I used Use
command to do this)
After making the B as subproject of A , I released the project A.
Then I created new release value and derived new prep project from
released project A
Now, when I'm trying to reconfigue the new prep project, I'm getting
following warning
04/25 11:48:05 Warning: No candidates found for directory entry
B:project:1. It will be left empty!.
04/25 11:48:06 Warning! 'B~V1.1_CT:project:1' unused under
'A~6:dir:1' in project 'A~mohan' - not a candidate.
Hope I made my problem clear.
Waiting for your valuable suggestions
Thanks and Regards,
Mohan
_______________________________________________
OpenCM mailing list
opencm at opencm.net
http://www.armory.com/mailman/listinfo.cgi/opencm
[attachment "winmail.dat" deleted by Pradeep George/SVL/SC/PHILIPS]
------------------------------
Message: 4
Date: Mon, 26 May 2003 15:28:51 -0400
From: "Cao, Jean" <jean.cao at brooks.com>
Subject: RE: [OpenCM] Addition of subproject : Problem in reconfigure
To: 'Open CM Mailing List' <opencm at armory.com>
Message-ID:
<FDC00D02B115D41198F900508BC98B0101AAF5D1 at mail-nawest1.brooks.com>
Content-Type: text/plain; charset="iso-8859-1"
Hi Mohan,
I am using Continnus CM v5.1, I think you need to add all the task for
migrate project B, then reconfig the new prep project from released
project
A . It should be fine.
Jean
-----Original Message-----
From: mohan_tarole at chennai.tcs.co.in
[mailto:mohan_tarole at chennai.tcs.co.in]
Sent: Sunday, May 25, 2003 10:33 PM
To: opencm at armory.com
Subject: [OpenCM] Addition of subproject : Problem in reconfigure
Hi All,
Thanks for support for my previous query
I got one more problem
I'm using Continnus CM v5.1 with UNIX client
I've a project (say A) hierarchy with 5-subprojects under it ( with
release
value X)
I migrated one project (say B) and moved it to released state with
release Y
Now I added the project B as subproject of project A ( I used Use
command
to do this)
After making the B as subproject of A , I released the project A.
Then I created new release value and derived new prep project from
released
project A
Now, when I'm trying to reconfigue the new prep project, I'm getting
following warning
04/25 11:48:05 Warning: No candidates found for directory entry
B:project:1. It will be left empty!.
04/25 11:48:06 Warning! 'B~V1.1_CT:project:1' unused under
'A~6:dir:1' in
project 'A~mohan' - not a candidate.
Hope I made my problem clear.
Waiting for your valuable suggestions
Thanks and Regards,
Mohan
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://deepthought.armory.com/pipermail/opencm/attachments/20030526/03939cbc/attachment-0001.htm
------------------------------
Message: 5
Date: Mon, 26 May 2003 21:10:02 -0700
From: Dan.Martin at slmd.com
Subject: Re: [OpenCM] Addition of subproject : Problem in reconfigure
To: Open CM Mailing List <opencm at armory.com>
Message-ID:
<OFA1A59246.64480081-ON88256D33.0015F077-88256D33.0016C2E7 at us.datex-ohmeda.com>
Content-Type: text/plain; charset=us-ascii
Mohan,
Just "Using" project B under Project A does not change the Release
value of
B. If you would have done a Reconfigure before releasing A, you would
have
gotten the same warning and your project B would be empty or gone.
You need to copy the new Release value to all of the objects that are
under
your B project by first querying for them and then changing one object
and
then using Attribute Copy to copy the release to the rest of them.
Then
all of your objects will show up if you reconfigure your project A.
Remember your Reconfigure is based on the Baseline which is your last
Release value and then included Tasks. Project B must still have
Release
Y, but project A has a different Release value. You did not say what
Release value you had for project A.
Dan Martin
mohan_tarole at chennai
.tcs.co.in To:
opencm at armory.com
Sent by: cc:
opencm-bounces at armor Subject: [OpenCM]
Addition of subproject : Problem in reconfigure
y.com
05/25/2003 10:32 PM
Please respond to
Open CM Mailing List
Hi All,
Thanks for support for my previous query
I got one more problem
I'm using Continnus CM v5.1 with UNIX client
I've a project (say A) hierarchy with 5-subprojects under it ( with
release
value X)
I migrated one project (say B) and moved it to released state with
release
Y
Now I added the project B as subproject of project A ( I used Use
command
to do this)
After making the B as subproject of A , I released the project A.
Then I created new release value and derived new prep project from
released
project A
Now, when I'm trying to reconfigue the new prep project, I'm getting
following warning
04/25 11:48:05 Warning: No candidates found for directory entry
B:project:1. It will be left empty!.
04/25 11:48:06 Warning! 'B~V1.1_CT:project:1' unused under
'A~6:dir:1' in
project 'A~mohan' - not a candidate.
Hope I made my problem clear.
Waiting for your valuable suggestions
Thanks and Regards,
Mohan _______________________________________________
OpenCM mailing list
opencm at opencm.net
http://www.armory.com/mailman/listinfo.cgi/opencm
------------------------------
_______________________________________________
opencm mailing list
opencm at armory.com
http://www.armory.com/mailman/listinfo.cgi/opencm
End of opencm Digest, Vol 1, Issue 16
*************************************
_______________________________________________
OpenCM mailing list
opencm at opencm.net
http://www.armory.com/mailman/listinfo.cgi/opencm
More information about the opencm
mailing list