[OpenCM] Re: opencm Digest, Vol 3, Issue 2
HS Vivek
HVivek at novell.com
Fri Aug 1 01:53:43 PDT 2003
thanks buddy it worked.
Regards,
Vivek
>>> mohan_tarole at chennai.tcs.co.in 8/1/2003 11:57:45 AM >>>
Hi Vivek,
When you set the workarea properties,
make sure you check the following options
Apply to all projects in hierarchy
and
relation to parent project should be absolute
With these options selected, i think you will be able to see your
sub-projects in seperate work area.
Regards,
Mohan
opencm-request at armory.com
Sent by: opencm-bounces at armory.com
08/01/2003 12:35 AM
Please respond to opencm
To: opencm at armory.com
cc:
Subject: opencm Digest, Vol 3, Issue 2
Send opencm mailing list submissions to
opencm at armory.com
To subscribe or unsubscribe via the World Wide Web, visit
http://www.armory.com/mailman/listinfo.cgi/opencm
or, via email, send a message with subject or body 'help' to
opencm-request at armory.com
You can reach the person managing the list at
opencm-owner at armory.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of opencm digest..."
Today's Topics:
1. Problem in reconfigure (HS Vivek)
2. Problem in reconfigure (HS Vivek)
----------------------------------------------------------------------
Message: 1
Date: Thu, 31 Jul 2003 11:29:25 -0600
From: "HS Vivek" <HVivek at novell.com>
Subject: [OpenCM] Problem in reconfigure
To: <opencm at armory.com>
Message-ID: <sf28fda0.049 at prv-mail25.provo.novell.com>
Content-Type: text/plain; charset=US-ASCII
Hi Group,
I have a Project A in which i have sub projects 1 2 and 3. Now i have
set the Work Area for Project A as D:\MYPROJECT and the path is
relative
and all for all hirearchy in the project. But still i see that the
sub
project 1 2 and 3 have there own work area and not inside MYPROJECT.
Can anyone help me.
Regards,
Vivek
------------------------------
Message: 2
Date: Thu, 31 Jul 2003 11:29:44 -0600
From: "HS Vivek" <HVivek at novell.com>
Subject: [OpenCM] Problem in reconfigure
To: <opencm at armory.com>,<pradeep.george at philips.com>
Message-ID: <sf28fdb6.050 at prv-mail25.provo.novell.com>
Content-Type: text/plain; charset=US-ASCII
Hi Group,
I have a Project A in which i have sub projects 1 2 and 3. Now i have
set the Work Area for Project A as D:\MYPROJECT and the path is
relative
and all for all hirearchy in the project. But still i see that the
sub
project 1 2 and 3 have there own work area and not inside MYPROJECT.
Can anyone help me.
Regards,
Vivek
------------------------------
_______________________________________________
opencm mailing list
opencm at armory.com
http://www.armory.com/mailman/listinfo.cgi/opencm
End of opencm Digest, Vol 3, Issue 2
************************************
_______________________________________________
OpenCM mailing list
opencm at opencm.net
http://www.armory.com/mailman/listinfo.cgi/opencm
More information about the opencm
mailing list