[OpenCM] Re: opencm Digest, Vol 3, Issue 2

[mohan_tarole at chennai.tcs.co.in]

Hi Vivek,

When you set the workarea properties,
make sure you check the following options
Apply to all projects in hierarchy
and 
relation to parent project should be absolute

With these options selected, i think you will be able to see your 
sub-projects in seperate work area.

Regards,
Mohan 





opencm-request at armory.com
Sent by: opencm-bounces at armory.com
08/01/2003 12:35 AM
Please respond to opencm

 
        To:     opencm at armory.com
        cc: 
        Subject:        opencm Digest, Vol 3, Issue 2



Send opencm mailing list submissions to
                 opencm at armory.com

To subscribe or unsubscribe via the World Wide Web, visit
                 http://www.armory.com/mailman/listinfo.cgi/opencm
or, via email, send a message with subject or body 'help' to
                 opencm-request at armory.com

You can reach the person managing the list at
                 opencm-owner at armory.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of opencm digest..."


Today's Topics:

   1. Problem in reconfigure (HS Vivek)
   2. Problem in reconfigure (HS Vivek)


----------------------------------------------------------------------

Message: 1
Date: Thu, 31 Jul 2003 11:29:25 -0600
From: "HS Vivek" <HVivek at novell.com>
Subject: [OpenCM] Problem in reconfigure
To: <opencm at armory.com>
Message-ID: <sf28fda0.049 at prv-mail25.provo.novell.com>
Content-Type: text/plain; charset=US-ASCII

Hi Group,

I have a Project A in which i have sub projects 1 2 and 3.  Now i have
set the Work Area for Project A as D:\MYPROJECT and the path is relative
and all for all hirearchy in the project.  But still i see that the sub
project 1 2 and 3 have there own work area and not inside MYPROJECT.

Can anyone help me.

Regards,
Vivek


------------------------------

Message: 2
Date: Thu, 31 Jul 2003 11:29:44 -0600
From: "HS Vivek" <HVivek at novell.com>
Subject: [OpenCM] Problem in reconfigure
To: <opencm at armory.com>,<pradeep.george at philips.com>
Message-ID: <sf28fdb6.050 at prv-mail25.provo.novell.com>
Content-Type: text/plain; charset=US-ASCII

Hi Group,

I have a Project A in which i have sub projects 1 2 and 3.  Now i have
set the Work Area for Project A as D:\MYPROJECT and the path is relative
and all for all hirearchy in the project.  But still i see that the sub
project 1 2 and 3 have there own work area and not inside MYPROJECT.

Can anyone help me.

Regards,
Vivek


------------------------------

_______________________________________________
opencm mailing list
opencm at armory.com
http://www.armory.com/mailman/listinfo.cgi/opencm


End of opencm Digest, Vol 3, Issue 2
************************************