Exceptions, sticky bits, and trap bits

Floating point operations can lead to any of the following types of floating point exceptions:

• Divide by zero exception

  This exception happens when a non-zero number is divided by floating point zero.

• Invalid operation exception

  All operations on signaling NaNs raise an invalid operation exception. Zero divided by zero, infinity subtracted from infinity, infinity divided by infinity all raise this exception. When a quiet NaN is compared with the greater or lesser relational operators, an invalid operation exception is raised.

• Overflow exception

  This exception occurs when the result of any floating point operation is too large in magnitude to fit in the intended destination.

• Underflow exception

  When the underflow trap is enabled, an underflow exception is signaled when the result of some operation is a very tiny non-zero number that may cause some other exception later (such as overflow upon division). When the underflow trap is disabled, an underflow exception occurs only when both the result is very tiny (as explained above) and a loss of accuracy is detected.

• Inexact or imprecise exception

  This exception is signaled if the rounded result of an operation is not identical to the infinitely precise result. Inexact exceptions are quite common. 1.0 / 3.0 is an inexact operation. Inexact exceptions also occur when the operation overflows without an overflow trap.

The floating point implementation on the Intel^(TM) processors includes another exception type called ``Denormalization exception''. This exception occurs when the result of an expression is a denormalized number.