(D3pccard) - PC Card kernel functions

Intro: introduction to PC Card client service function calls
AccessConfigurationRegister: access a card configuration register
AddSocketServices: add socket service handler
AdjustResourceInfo: manage system resources availbe to clients
CheckEraseQueue: announce that new erase requests are on the erase queue
CloseMemory: shut down power to the socket
CopyMemory: Copy memory from card's memory to another location
DeregisterClient: deregister client
DeregisterEraseQueue: deregister the erase queue
GetCardServicesInfo: determine whether CardServices is present
GetClientInfo: return information about a PC Card client
GetConfigurationInfo: get information about the PC Card configuration
GetEventMask: receive notification of particular events
GetFirstClient: identify first client registered on the system
GetFirstPartition: return device information for the first partition on the card
GetFirstRegion: return device information for the first region of devices on the card
GetFirstTuple: return first tuple of specified type
GetFirstWindow: return a handle and information for the first memory or I/O window
GetMemPage: get page information for a memory window
GetNextClient: return ClientHandle for next registered client
GetNextPartition: return information about client's next partition
GetNextRegion: return information abut the next region of devices on the client's CIS
GetNextTuple: return next tuple
GetNextWindow: return window information for next window on logical socket
GetStatus: return status of client's socket and card
GetTupleData: return data from the current tuple body
MapLogSocket: map a logical socket to Socket Services
MapLogWindow: map a window to a physical adapter
MapMemPage: map memory area of Client's card into memory window
MapPhySocket: map a physical adapter to a logical socket
MapPhyWindow: map a physical adapter and window to a logical WindowHandle
ModifyConfiguration: partially modify socket and PC Card configuration
ModifyWindow: change the attributes of a window
OpenMemory: open area of a memory card
ReadMemory: read card's memory region
RegisterClient: register a client with CardServices
RegisterEraseQueue: register client's erase queue
RegisterMTD: registers a Memory Technology Driver (MTD) with ClientServices
RegisterTimer: register a client's standing callback request with CardServices
ReleaseConfiguration: release configuration information
ReleaseDMA: release DMA channel
ReleaseExclusive: end monopoly use of a card in a socket
ReleaseIO: unbind an I/O address from a client
ReleaseIRQ: unbind IRQs that are bound to a client
ReleaseSocketMask: shut off socket status change notifications
ReleaseWindow: deallocate system memory or I/O address space
ReplaceSocketServices: Switch to new Socket Services
RequestConfiguration: physically configure client's card and socket
RequestDMA: bind DMA channel to client's 16-bit card
RequestExclusive: request exclusive use of card in a socket
RequestIO: bind I/O addresses to a client
RequestIRQ: bind an IRQ to a client
RequestSocketMask: arrange to receive socket status change notifications
RequestWindow: allocate a block of system memory or I/O address space
ResetFunction: reset the function of a card in a socket
ReturnSSEntry: get pointer to an installed Socket Services routine
SetEventMask: change event mask for the client
SetRegion: set region characteristics
ValidateCIS: check Card Information Structure (CIS) on client's card
VendorSpecific: support for unique vendor supplied features
WriteMemory: write to a memory PC card device