Configuring network hardware
Configure network hardware using the
Network Configuration Manager:
From the Hardware menu, select Add New LAN Adapter. Further configuration will be determined by the bus type of your machine and the ability of the Network Configuration Manager to detect your adapter. See:
From the Hardware menu, select Add New WAN Connection, and select the type of WAN connection to be added. After confirming that TCP/IP will be configured over the selected driver:
For complete information on configuring serial connections, including determining link types and advanced options such as filtering, compression, and debugging, see ``Adding a SLIP link'' and ``Adding a PPP link endpoint'' in the Networking Guide.
For general information on the PPP and SLIP protocols, see:
Select the adapter to modify from the list. From the Hardware menu, select Modify, then enter new configuration parameters as you did when adding adapters.
Use the PPP Manager to modify your PPP configuration. See protocol stack configuration.
Select the adapter to view from the list, then from the Hardware menu, select Examine.
Select the adapter to deconfigure from the list, then from the Hardware menu select Remove. You will be prompted to confirm your choice and informed when the operation is complete.