Getting routing information
The
getroute(ADMN)
command is used to retrieve routing information
for all IP networks and subnetworks, as seen by the
host to which it is addressed.
The syntax of getroute is
getroute node community.
The following shows sample output from a getroute invocation.
Example 10-10 getroute example
# getroute paris public Route to: 0.0.0.0 via: 10.0.246.1 on if: 1 metric: 2 type: 4 proto: 8 Route to: 127.0.0.1 via: 127.0.0.1 on if: 2 metric: 0 type: 3 proto: 2 Route to: 10.0.0.0 via: 10.0.246.1 on if: 1 metric: 2 type: 4 proto: 8 Route to: 10.0.118.0 via: 10.0.246.1 on if: 1 metric: 2 type: 4 proto: 8 Route to: 10.0.246.0 via: 10.0.246.3 on if: 1 metric: 0 type: 3 proto: 2
See also: