SCO OpenServer Handbook
Chapter 24, Adding modems

Chapter 24

Chapter 24<P> Adding modems Adding modems

Modems enable you to communicate over phone lines with remote systems.


NOTE: The UUCP package must have been installed on your system to support modem connections whether these are used with cu, UUCP, SLIP or PPP. Use the Software Manager or custom(ADM) to install this package if necessary. 

To set up a modem on your system, follow these steps:

  1. Install the modem.

  2. Configure UUCP.

  3. Test the modem.
See also ``Troubleshooting modems''.