Logging into multiple NetWare servers

To log into multiple servers in the NetWare Access Manager, pull down


the Server menu and select Login (Multiple Servers).

The NetWare Login Manage window displays the NetWare servers you can log into. In the NetWare Login Manager window:

1. The feature Reuse login name and password is, by default, enabled. It uses one login and password combination to log into multiple servers.

   Disable this feature only if your login or password differs from server to server.
   

2. Log into multiple servers in one of two ways:

   • To log into some of the displayed servers, select the desired servers then click on Login.

   • To log into all displayed servers, click on Login (All Servers).
   
   

3. In the NetWare Server Login window, complete the multiple server login in one of two ways:

   • If Reuse login name and password is enabled, input your NetWare login, password and click on Login.

   • If Reuse login name and password is disabled, you are prompted to enter a separate login and password for each server.

4. The Message window displays successful and failed logins. Click on OK.

5. In the NetWare Login Manager window, pull down the Server menu and select Exit.

You can also login from the command line. See nwlogin(NWG) for details on logging into a single server.