To change your NetWare password for multiple servers in
the NetWare Access Manager, pull down the Server
menu and select Change Password (Multiple Servers).
The NetWare Password Manager window displays the
NetWare servers you are logged into. You must log into a server
before you can change your password.
To change passwords in the NetWare Password Manager window:
The feature Reuse password is, by default, enabled.
It applies one password to multiple server password changes.
Disable this feature only if you want your password to vary from
server to server.
Change multiple passwords in one of two ways:
To change your password on some of the displayed servers,
select the desired servers then click on Change Password.
To change your password on all displayed servers, click on
Change Password (All Servers).
In the Current NetWare Password Verification window,
complete the multiple server password change in one of two ways:
If Reuse password is enabled,
input your NetWare password and click on Verify Password.
In the Change NetWare Password window, input the new password twice
and click on Change Password.
If Reuse password is disabled, you are prompted to
enter an old and new password for each server selected.
The Message window confirms successful
password changes. Click on OK.
In the NetWare Password Manager window, pull down the
Server menu
and select Exit to return to the NetWare Access Manager.
There is no command line equivalent for multiple server password
change. See
nwpasswd(NWG)
for details on single server password change.
