The programmers at these pages are for suggestion only, and
none of these are guarenteed to meet any requirement.
They are not intended to be used, and they may not work at
all. Any author, shall not be responsible for any problem, risc, or
other trouble caused under any circumstances.
Using any programmer at any page, are for own money and
risc, and building these are for own money too, even if
registrating programmer software. I shall not be held
responsible of any software, nor own software problems.
No programmers are intended to be connected to any
environment that is not fully rs232 compatible, including
limitation on power. Maximum power must be limited to 25mA.
E-Mail address: Jens.Madsen@post3.tele.dk