From: "Ed" To: "R. Steve Walz" Subject: Re: ASM48 Date: Wed, 25 Sep 2002 18:07:05 +1000 > Ed wrote: > > > > Hi Steve, > > Some time ago I believe I sent you a copy of ASM48V11 - an > > 8048/41 cross-assembler than run under CP/M. > > > > I've just converted it to for MS-DOS. If you'd like a copy, let > > me know and I'll email it. > --------------- > Sure, I'd love a copy, I'll put it on my site with your other stuff > if you like! Yes, that'd be fine. Thanks. I've attached new DOS and CP/M versions. I created the DOS version by passing the CP/M source through a 8080 to 8086 translator and then manually adjusting what needed to be changed. Only took a couple of days. The DOS version retains the old DOS 1.x style FCB calls. I've tested it under Win98SE and it works fine. (I recall someone once claiming that FCB calls don't work on some versions of Windows - I don't know which that might be though.) If you still remember how to use CP/M ASM then you'll have no problems using these progs :) regards, Ed filename="ASM48DOS.ZIP" filename="ASM48CPM.ZIP"