Note that this is a provisional parts list. As the computer is still a 'work-in-progress' project, this is just a list of what I see on my circuit boards at this moment in time.
| Part | Quantity | Comment |
|---|---|---|
| R6502AP | 1 | Note the suffix 'AP' - this is the 2MHz part |
| R6522AP | 2 | Note 'AP' again |
| R6551AP | 1 | Note 'AP' again |
| MAX232CPE | 1 | I should have got the 233, which needs no external capacitors |
| 74LS00 | 2 | |
| 74LS04 | 1 | |
| 74LS138 | 1 | |
| 74LS154 | 1 | |
| 74LS245 | 1 | |
| HY62256ALP-10 | 1 | Other flavours of 62256 should work |
| M28C64C-20P1 (SGS-Thomson) | 1 | There are other varieties of 2864, but you want one with a Ready/Busy pin |
| 2MHz crystal | 1 | |
| 1.8432MHz crystal oscillator module (TTL output) | 1 | |
| DS1813-10 | 1 | EconoReset IC from Dallas Semiconductor |
| 1uF electrolytic cap. | 5 | For the MAX232CPE |
| 47nF polyester cap. | 1 | |
| 0.1uF ceramic cap. | 8 | Decoupling capcitors |
| 1k res. | 2 | |
| 3k3 res. | 3 | |
| 10k linear pot/preset | 1 | Contrast control for the LCD display |
| 150R res. | 1 | Series resistor for power LED (see below). Adjust as necessary |
| 3mm blue LED | 1 | Blue LEDs are expensive, but cool. |
| Kodenshi PIC26043SM | 1 | Infra red receiver |
| Single pole pushbutton | 1 | The reset button |
| 14-pin IC skt | 3 | |
| 16-pin IC skt | 2 | |
| 20-pin IC skt | 1 | |
| 24-pin IC skt | 1 | |
| 28-pin IC skt | 3 | One of these should be a ZIF socket (for the EEPROM) |
| 40-pin IC skt | 3 | |
| 2-way PCB plug + socket | 6 + 6 | |
| 3-way PCB plug + socket | 4 + 4 | |
| 5-way PCB plug + socket | 1 + 1 | |
| 6-way PCB plug + socket | 3 + 3 | |
| 8-way PCB plug + socket | 3 + 3 | |
| 10-way PCB plug + socket | 2 + 2 | |
| 12-way PCB plug + socket | 2 + 2 | |
| 9-way D male | 1 | For the RS232 port |