Strobe Images - Flash Trigger

Flash Trigger

The trigger was made for a Mamiyalite ZE flash unit. It uses the power available from the flash's trigger terminals to power the circuit that converts a normally-closed trigger circuit into the normally-open signal that the flash requires. This is done by bleeding off power through a high enough resistance that the flash does not trigger.

   |⟨       ⟨       ⟩       ⟩|   
 
 Size   Default   +1.4 



⟨⟨ Back to Strobe Images gallery

More Photo Galleries
This image copyright © 1986 John H. DuBois III
This gallery created on Friday, February 13, 2004 • 1 of 8 images displayed