From chezguy at shaw.ca Fri Sep 14 14:45:35 2007 From: chezguy at shaw.ca (Guy de Margerie) Date: Sat Sep 15 11:25:31 2007 Subject: [SlideCube] defective auto-focus on B&H 991 cube slide projector. Message-ID: <000401c7f71b$b07bceb0$dcd94f18@02cae82e8> I would sure love to get some help to repair the auto-focus which keeps searching, or, if no-one knows how to fux it, tell me how to disable it. I can focus manually if needs be. I have over 5000 slides to review and put in order, and the auto-focus would help, although not essential. Many thanks Guy From harry55551 at yahoo.com Sat Sep 15 14:01:21 2007 From: harry55551 at yahoo.com (Hans Schwethelm) Date: Sat Sep 15 14:01:26 2007 Subject: [SlideCube] Re: SlideCube Digest, Vol 10, Issue 1 In-Reply-To: <200709151200.ac24905@deepthought.armory.com> Message-ID: <314546.19156.qm@web57003.mail.re3.yahoo.com> I tried to send a message to chezguy@shaw.com but it was returned. Get back to me and I`ll try again with different adress. Regards slidecube-request@armory.com wrote: Send SlideCube mailing list submissions to slidecube@armory.com To subscribe or unsubscribe via the World Wide Web, visit http://www.armory.com/mailman/listinfo.cgi/slidecube or, via email, send a message with subject or body 'help' to slidecube-request@armory.com You can reach the person managing the list at slidecube-owner@armory.com When replying, please edit your Subject line so it is more specific than "Re: Contents of SlideCube digest..." Today's Topics: 1. defective auto-focus on B&H 991 cube slide projector. (Guy de Margerie) ---------------------------------------------------------------------- Message: 1 Date: Fri, 14 Sep 2007 16:45:35 -0500 From: Guy de Margerie Subject: [SlideCube] defective auto-focus on B&H 991 cube slide projector. To: slidecube@armory.com Message-ID: <000401c7f71b$b07bceb0$dcd94f18@02cae82e8> Content-Type: text/plain; format=flowed; charset=iso-8859-1; reply-type=original I would sure love to get some help to repair the auto-focus which keeps searching, or, if no-one knows how to fux it, tell me how to disable it. I can focus manually if needs be. I have over 5000 slides to review and put in order, and the auto-focus would help, although not essential. Many thanks Guy ------------------------------ _______________________________________________ http://www.armory.com/mailman/listinfo.cgi/slidecube End of SlideCube Digest, Vol 10, Issue 1 **************************************** From harry55551 at yahoo.com Sat Sep 15 14:27:31 2007 From: harry55551 at yahoo.com (Hans Schwethelm) Date: Sat Sep 15 14:27:41 2007 Subject: [SlideCube] Re: SlideCube Digest, Vol 9, Issue 1 In-Reply-To: <200611251200.ac26814@deepthought.armory.com> Message-ID: <702684.19179.qm@web57006.mail.re3.yahoo.com> slidecube-request@armory.com wrote: Send SlideCube mailing list submissions to slidecube@armory.com To subscribe or unsubscribe via the World Wide Web, visit http://www.armory.com/mailman/listinfo.cgi/slidecube or, via email, send a message with subject or body 'help' to slidecube-request@armory.com You can reach the person managing the list at slidecube-owner@armory.com When replying, please edit your Subject line so it is more specific than "Re: Contents of SlideCube digest..." Today's Topics: 1. Repair of Sears/Bell & Howell Slide Projectors (Hans Schwethelm) 2. Re: Repair of Sears/Bell & Howell Slide Projectors (Tony Vigue) ---------------------------------------------------------------------- Message: 1 Date: Fri, 24 Nov 2006 19:08:46 -0800 (PST) From: Hans Schwethelm Subject: [SlideCube] Repair of Sears/Bell & Howell Slide Projectors To: slidecube@armory.com Message-ID: <847851.13229.qm@web57010.mail.re3.yahoo.com> Content-Type: text/plain; charset=iso-8859-1 The question comes up about Information how to repair a Projector. There is on ebay, under Projectors a Gent that sells the Gear part that usually breaks.He will include a description on how to do it. He is the most reasonable ( moneywise) I have about 10 projectors that I picked up for peanuts and repaired.Besides the gear there is a problem with the BLADE that fails to close when changing slides allowing the full beam of light to be projected onto the screen.The problem is solved by cutting 3 coils off the spring that pulls the blades shut.I took one projector apart and experimented.Compared to Kodak, this is a simple design. One more thing. When taking out the 4 screws that show after lifting the lid, be gentle and don`t force anything. Tere is a small Hexagon head nut screwed into one of the 4 side plates.Most likely it is under the sideplate that is held on with double sided tape. If you need any info, perhaps I can help ------------------------------ Message: 2 Date: Sat, 25 Nov 2006 08:36:47 -0500 From: "Tony Vigue" Subject: Re: [SlideCube] Repair of Sears/Bell & Howell Slide Projectors To: "Hans Schwethelm" , Message-ID: <000c01c71096$c198bda0$140210ac@Hal> Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original Thanks Hans, great info. One of these days I will restore mine if I don't digitize the slides first. I'm still waiting for the prices to come down on the slide scanners. Take care, -tv ----- Original Message ----- From: "Hans Schwethelm" To: Sent: Friday, November 24, 2006 10:08 PM Subject: [SlideCube] Repair of Sears/Bell & Howell Slide Projectors > The question comes up about Information how to repair a Projector. There > is on ebay, under Projectors a Gent that sells the Gear part that usually > breaks.He will include a description on how to do it. He is the most > reasonable ( moneywise) I have about 10 projectors that I picked up for > peanuts and repaired.Besides the gear there is a problem with the BLADE > that fails to close when changing slides allowing the full beam of light > to be projected onto the screen.The problem is solved by cutting 3 coils > off the spring that pulls the blades shut.I took one projector apart and > experimented.Compared to Kodak, this is a simple design. One more thing. > When taking out the 4 screws that show after lifting the lid, be gentle > and don`t force anything. Tere is a small Hexagon head nut screwed into > one of the 4 side plates.Most likely it is under the sideplate that is > held on with double sided tape. If you need any info, perhaps I can help > > _______________________________________________ > http://www.armory.com/mailman/listinfo.cgi/slidecube > ------------------------------ _______________________________________________ http://www.armory.com/mailman/listinfo.cgi/slidecube End of SlideCube Digest, Vol 9, Issue 1 *************************************** From sjceo at yahoo.com Sun Dec 30 23:05:06 2007 From: sjceo at yahoo.com (sarah jane orcutt) Date: Sun Dec 30 23:05:07 2007 Subject: [SlideCube] B&H 965Q Message-ID: <20071231070505.GB6689@armory.com> I'm looking for a motor for our Bell & Howell 965Q and thought I might find some help here? Thanks, Sarah Jane