[SlideCube] Bell & Howell CP 40 slide cube 35 mm projector

Tony Vigue tvigue at adelphia.net
Sat Dec 20 21:26:36 PST 2003


Sorry folks, my last message bounced because the moderator will not allow
more than 40 kb per message. Soooooooo
here is the first of five.
Tony V.

----- Original Message -----
From: "Henry Bibb" <hqbibb at earthlink.net>
To: <slidecube at armory.com>
Sent: Thursday, December 18, 2003 7:13 PM
Subject: RE: [SlideCube] Bell & Howell CP 40 slide cube 35 mm projector


> Alexander,
>
> I think mine's an AF-60, and I don't know if I have the manual
> anymore or not.  But, fire away with questions and I'll see if
> I can help you out.
>
> One peculiarity of the Slide Cube projectors, as compared to a
> Carousel or something, is that the Slide Cube can only back up
> one slide, where the others can go backward indefinitely.
>
> It might be an issue if I used the thing for presentations, but
> for my uses, it's never been a problem.
>
> As for the bulb, I don't think I've ever changed mine.  I'll
> have to go get it out, and have a look to see how it goes in
> there.
>
> Henry Bibb
>
>
>
> > [Original Message]
> > From: Alexander M McBride <sanlo at rushmore.com>
> > To: <slidecube at armory.com>
> > Date: 12/18/2003 5:58:47 PM
> > Subject: [SlideCube] Bell & Howell CP 40 slide cube 35 mm projector
> >
> > I'm considering the purchase of a Bell & Howell CP 40 slide cube
projector
> > but I can't find an instruction manual anywhere on the Internet.  Does
> > anybody out there know where I could obtain one?  Also, the ELH lamp in
> this
> > device needs to be changed.  The current bulb seems to be almost wedged
> into
> > place..Any suggestions as to how to replace it? Thanks  Alex McBride
> >
> > _______________________________________________
> > http://www.armory.com/mailman/listinfo.cgi/slidecube
>
>
>
> _______________________________________________
> http://www.armory.com/mailman/listinfo.cgi/slidecube


More information about the SlideCube mailing list