[SlideCube] Projector Bulb Conversion

John H. DuBois III spcecdt@armory.com
Sun, 26 Jan 2003 01:28:49 -0800

On Fri, Jan 24, 2003 at 04:26:52PM -0500, TARLTONE@aol.com wrote:
> Since I have a model 981Q with a bad lamp socket and a burned out CBA bulb, 
> would it be possible to convert to an easier to find (and possibly cheaper) 
> bulb?

It would be possible in theory, but I don't know if I'd try it.
I see that KMR Electronics has CBA sockets for carousel projectors:


You might ask them for a description of it to determine if it would work
in a slide cube projector.

CBAs are expensive but they pop up on ebay:


I've had good luck buying projection bulbs from ebay sellers.

John DuBois  spcecdt@armory.com.  KC6QKZ/AE  http://www.armory.com./~spcecdt/