From samj@aiconnect.com  Mon Jan  7 20:16:15 2002
From: samj@aiconnect.com (Samuel L. Jernigan)
Date: Mon, 07 Jan 2002 15:16:15 -0500
Subject: [SlideCube] Carousel replacement
Message-ID: <200201072016.PAA10787@bellevue.aiconnect.com>

The carousel(the flat round black plastic piece with four slide holes that
cycle the slides) of my Bell & Howell cube projector is worn to the extent
that it will not fully cycle. Some of the teeth that mesh with the reduction
gear are broken. Is there a replacement carousel available?

Sam Jernigan

From spcecdt@armory.com  Tue Jan  8 11:14:41 2002
From: spcecdt@armory.com (John H. DuBois III)
Date: Tue, 8 Jan 2002 03:14:41 -0800
Subject: [SlideCube] Carousel replacement
In-Reply-To: <200201072016.PAA10787@bellevue.aiconnect.com>; from samj@aiconnect.com on Mon, Jan 07, 2002 at 03:16:15PM -0500
References: <200201072016.PAA10787@bellevue.aiconnect.com>
Message-ID: <20020108031440.A17564@armory.com>

On Mon, Jan 07, 2002 at 03:16:15PM -0500, Samuel L. Jernigan wrote:
> The carousel(the flat round black plastic piece with four slide holes that
> cycle the slides) of my Bell & Howell cube projector is worn to the extent
> that it will not fully cycle. Some of the teeth that mesh with the reduction
> gear are broken. Is there a replacement carousel available?

No, I don't think there is a replacement carousel available.  I'm afraid your
best option is to pick up a used one (and perhaps use your old one for parts).

	John
--
John DuBois  spcecdt@armory.com.  KC6QKZ/AE  http://www.armory.com./~spcecdt/