[OpenCM] Error in Reconfigure after changing workarea
Tom Pohl
tom.pohl at Remedy.COM
Fri May 23 09:02:27 PDT 2003
Mohan,
When resetting work areas, Continuus tries to move the work area files file
from the original work area to another. Try the intermediate step of
removing the work area (uncheck the Maintain the Work Area box) and recurse.
(Command line: ccm wa -nwa -recurse -p xxxx~xxx). Then set you work areas
to the new one.
Good Luck.
-Tom
______________________________
Tom Pohl
Senior Configuration/Release Specialist
Development - Release & Install Engineering
Remedy, a BMC Software Company
MTV3-2333 (650) 254-5306
-----Original Message-----
From: mohan_tarole at chennai.tcs.co.in [mailto:mohan_tarole at chennai.tcs.co.in]
Sent: Friday, May 23, 2003 6:31 AM
To: opencm at armory.com
Subject: [OpenCM] Error in Reconfigure after changing workarea
Hi
I'm using Continuus v5.1 and UNIX CCM client
I've one project which has got 5 sub-projects under it
I changed the work-area path of the top level project including the
sub-projects
Now, When I'm trying to reconfigure the top level project I'm getting the
following warning , and reconfigure failing
Project 'XXXXXXX~XXX' membership change not allowed
Workarea is not visible from this interface or not writable by this user
Reconcile option is also disabled
Need your help in this
Thanks and regards,
Mohan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://deepthought.armory.com/pipermail/opencm/attachments/20030523/6adf7072/attachment.htm
More information about the opencm
mailing list