From mohan_tarole at chennai.tcs.co.in Tue Jul 29 12:14:46 2003 From: mohan_tarole at chennai.tcs.co.in (mohan_tarole@chennai.tcs.co.in) Date: Mon Jul 28 22:47:07 2003 Subject: [OpenCM] Reconfigure Template : release value not appearing Message-ID: Hi All, I've one released project A with release value R I want to derive two prep projects from A , Lets say B1 and B2 with release values R1 and R2 respectively 1) When I'm trying to set the reconfigure template for these two prep projects , in the baseline release list (in reconfigure template dialog box), release R is not appearing Can any body tell what could be the problem? Release value R is still active. 2) When does the release value appear in the base line release list of the reconfigure template dialog box? Regards, Mohan From mohan_tarole at chennai.tcs.co.in Tue Jul 29 11:56:36 2003 From: mohan_tarole at chennai.tcs.co.in (mohan_tarole@chennai.tcs.co.in) Date: Mon Jul 28 23:16:11 2003 Subject: [OpenCM] Reconfigure Template : release value not appearing Message-ID: Hi All, I've one released project A with release value R I want to derive two prep projects from A , Lets say B1 and B2 with release values R1 and R2 respectively 1) When I'm trying to set the reconfigure template for these two prep projects , in the baseline release list (in reconfigure template dialog box), release R is not appearing Can any body tell what could be the problem? Release value R is still active. 2) When does the release value appear in the base line release list of the reconfigure template dialog box? Regards, Mohan Tarole From HVivek at novell.com Thu Jul 31 12:29:25 2003 From: HVivek at novell.com (HS Vivek) Date: Thu Jul 31 10:29:46 2003 Subject: [OpenCM] Problem in reconfigure Message-ID: Hi Group, I have a Project A in which i have sub projects 1 2 and 3. Now i have set the Work Area for Project A as D:\MYPROJECT and the path is relative and all for all hirearchy in the project. But still i see that the sub project 1 2 and 3 have there own work area and not inside MYPROJECT. Can anyone help me. Regards, Vivek From HVivek at novell.com Thu Jul 31 12:29:44 2003 From: HVivek at novell.com (HS Vivek) Date: Thu Jul 31 10:30:10 2003 Subject: [OpenCM] Problem in reconfigure Message-ID: Hi Group, I have a Project A in which i have sub projects 1 2 and 3. Now i have set the Work Area for Project A as D:\MYPROJECT and the path is relative and all for all hirearchy in the project. But still i see that the sub project 1 2 and 3 have there own work area and not inside MYPROJECT. Can anyone help me. Regards, Vivek